You might already have an idea of what this blog is going to be about. Yes, with so many queries being received from netizens regarding the Linksys extender setup process, we decided to cover this topic again for your ease of use. Linksys extender devices are the widely used devices with support for multiple wireless devices at a time. Setting up such a device is important if you are looking for seamless internet connectivity throughout your home.

Here are some insights into what you would require before you actually go on to set up your Linksys Extender device.

Things you would need

The main router credentials
An ethernet cable
A computer system

Make sure you have an Ethernet cable in working condition, so you don’t waste time later, looking for solutions online.

When you have all the things you need, start by deciding an appropriate location to install your extender device. If you are using a wireless connection, an ideal location would be where your extender can receive up to 50% of the router signal strength. Once you have finalized a location, fix your extender to the power outlet and make the connections required. Follow these steps to do the same:

Connect your Linksys range extender to the LAN port of your computer system using an Ethernet cable. Make sure the LED lights on the front panel are stable.
Now, in the web browser on your computer system, enter the router IP address i.e 192.168.1.1 in the address bar. If that doesn’t work, try using the default web address Extender.linksys.com to access the same.
Once you type these addresses in the address bar, click the Enter button, and you will be directed to the default Linksys extender setup page.
You will be required to enter the admin username and the password details. Leave the username field blank and type “admin” in the password field. Now, click on the “Log in” button. You will now reach the main dashboard of your Linksys range extender.
Now, in the Wireless Tab, click on the “Basic Wireless Settings” button.
In the “Configuration View” section that populates, select the radio button next to “Manual” and assign a new network SSID to your new network.
Further, under the “Wireless Security” section, select the latest security settings that you desire and are suitable with your router configuration.
Also, specify a network security key or password of the router network in its respective field and click on the “Save Settings” button.
Once you have clicked on the button, you will need to power cycle your networking devices and then use the new extended network.

The final word

The Linksys extender setup process is easy to follow and can be completed using the steps mentioned on the blog above. If you face any issues doing the setup, check for any discrepancies in the web address extender.linksys.com, you enter and the default credentials you use. If you are looking for more help on the same, you can always reach out to the team at our end.