Range extenders can be a helping hand for most of us when don’t get required speed from our routers due to various reasons like dead zones in our home network or any kind of electronic devices interruptions which is preventing signals coming from router. Talking about Linksys Extender RE6500 comes with shelf- or wall-mountable piece with two external antennas. Linksys Extender RE6500 has four gigabit Ethernet ports to put up wired clients with no USB device support. You can enjoy streaming music throughout media players 3.5mm headphone jack.

Linksys Extender RE6500 has four Ethernet ports which has LED sited below it to signify network traffic. You will see multifunction from Linksys RE6500 One LED which is located at top of the extender. It flashes white once commencing a WPS connection and stay solid while connection is booming also turns yellow as soon as WPS connection attempt becomes unsuccessful.

Steps for Setting up Linksys Extender RE6500

First attach antennas & power cables make sure antennas are in upright position for better signals.
Plug up Linksys Extender RE6500 in between router and where Wi-Fi is not available midway between your router and the area without Wi-Fi. Ensure you are having Wi-Fi signal on device which you going to use for setup.
Wait for a solid light it can take about two minutes.
In the meantime connect with Wi-Fi network computer, phone or tablet.
If you get message of “Do you want to set up your network, just click on the link, ‘Connect to network without setting it up.’
If it doesn’t then go to web browser and try with Linksys RE6500 IP address or local address http://extender.linksys.com/.

For further assistance on every issue of Linksys router & extenders you can contact our technical support unit for better understanding of configuration. Call on toll free for quick replies.